刀具高清視頻檢測儀/測量儀參數
Tool HD Video Inspection/Instrument Parameters
刀刃長度 Flute length | 100mm
|
裝夾最大刀柄 maximum shank | 3-35
|
物方視場Objent field | 最小倍率時視場為15.5mm Minimum rate field |
物方視場Objent field | 最大倍率時視場為2.5mmMax rate field |
放大倍數(X)Magnification | 19-145 |
選配加強型Enhanced Type | The electronic ruler with precision patch grating is installed with tool length measurement function ,0.0001mm |
刀具高清視頻檢查檢測效果
檢測銑刀，缺口，崩裂
Effect of Tool HD Video Detection
銑刀用途：側刃、底刃、圓弧、角度研磨過程中出現的外觀不良進行觀察檢測，表面狀況進行研究分析等工作。
銑刀產品特點：
全新設計雙屏觀察應用，同時觀察刀具側刃、底刃，提高檢測效率，節省人工；
人性化設計刀具定位治具，可快速進行批量觀察，滿足不同型號刀具直徑、長度、圓弧、角度自適應調節及批量定位觀察檢測；
超高清彩色CCD，成像更清晰、畫質細膩、色彩還原性強，能輕松觀察刀具缺陷，減少疲勞；
24寸訂制版高清顯示器，有不同視野的視覺搭配可供選擇，能滿足大小不同的刀具檢測。
手旋式垂直上下調節，水平上下調節、左右調節。
設計有加強版，帶刀長測量功能，精度0.001mm，安裝有精密光柵尺
可以裝夾最大的刀柄35mm 含刀柄長度150mm 刀柄長度10～60
刀刃長度100 最小倍率時視場為15.5mm,上面給出的視場只給出顯示屏高度方向的尺寸，如果是對角線的視場會大許多的，實測最小倍數對角線視場為22mm， 最大倍率時視場為2.5mm,
Milling cutter application: observe and detect the poor appearance of side edge, bottom edge, arc, angle grinding during grinding, to research and analyze surface conditions.
Milling cutter product features:
New design of double screen observation, simultaneously to observe the side edge and bottom edge of cutters, improve the detection efficiency, save labor cost.
Humanized designed tool-positioning fixture, can be quickly batch observation, can be adaptive adjustment and batch positioning detection to meet the different types of cutters’ diameter, length, arc, angle.
Ultra high definition color CCD, imaging more clear picture quality fine color reduction, can easily observe tool defects, reduce fatigue.
24 inch customized HD display, there are different optional visual field of view to choose, can detect different sizes of cutters.
Hand rotating to adjust regulation, vertical up and down, horizontal up and down, left and right.
產品特性\用途：
Product Characteristics \Use
1、立、臥雙HDMI高清智能工業CCD影像檢查系統專用設計，方便產品正面及側面快速檢測。
Vertical and horizontal double HDMI high definition intelligent industrial CCD image inspection system is specially designed to facilitate rapid detection of front and side of products.
2、大屏幕高解析度畫面、無反光、19倍至145倍或28倍至198倍之間可調無級倍率，可選配更高倍數進行高精度標尺測量外徑，像素精密度可達0.003mm，可辨識及判斷，生產線上產品的缺陷不良立即呈現。
Large screen high resolution picture, no reflection, adjustable stepless ratio between 9.5 times and75 times or 19 times to 145 times. Higher multiple can be selected to measure the outer diameter with high precision scale. The pixel precision can reach 0.003 mm. It can be identified and judged. The defect of the product on the production line will appear immediately.
3、操作簡易，便于任何環境使用，無需經過特別訓練，快速上手。
移動臺上、下、前、后均可對焦，使用方便。
Easy to operate, easy to use in any environment, without special training, fast start. The mobile platform can focus on the top, bottom, front and back, which is convenient to use.
4、可選單熒幕切換或雙熒幕雙畫面可獨立觀測。
Optional single screen switching or double screen double screen can be observed independently.
5、可倍標準校正片進行比例測量，高倍測量精度之高可比擬甚至超過鐳射測量的精密度，選配更高倍數進行高精度標尺測量外徑，像素精密度可達0.003mm，進行可視化測量，鼠標直接拉數.
Multiplier standard calibration slice is used for scale measurement. The high precision of measurement can be comparable to or even exceed the precision of laser measurement. Higher multiplier is selected to measure external diameter with high precision scale. The precision of pixel can reach 0.003 mm. Visual measurement is carried out and using mouse directly to pull number.
6、可以配合我司產的高精度同心度儀旋轉直接可視化同心度偏離大?。簧拜喖y路，刀口直線度，或刀刃缺陷可一目了然。
It can directly visualize the deviation of concentricity with the high precision concentricity tester produced by our company; the grinding wheel grain, the knife edge straightness, or the knife edge defects can be seen at a glance.
7、適用于刀具刃口及直徑、長度、角度、R角的測量和外觀的檢測。
It is suitable for measuring the cutting edge and diameter, length, angle and R angle of the cutter and detecting the appearance of the cutter.
8、高清高倍數配置適用于微鉆檢測,微鉆偏心觀測,直徑測量等.
High definition and multiple configuration is suitable for micro-drill detection, micro-drill eccentricity observation, diameter measurement, etc.
- 類型 :
