揉捏奶头高潮呻吟视频试看,亚洲精品无码av人在线观看,波多野结衣喷水最猛一部,77777亚洲午夜久久多喷

迷你偏擺測量儀

主要用于精密軸類零件徑向跳動誤差，用兩頂尖定位軸類零件，轉動被測零件，測針探測在零件圓柱面上，直接讀取杠桿表徑跳動誤差。

Mini-pendulum measuring instrument

It is mainly used for radial run-out error of precision axle parts. Two pins are used to locate axle parts, rotate the measured parts, and probe the cylindrical surface of the parts. The run-out error of lever gauge diameter is read directly.

特點：

1、 采用精密鋼制頂尖， 可選配鎢鋼頂尖，耐磨。

2、 配備高精度表座，可以精密微調，保證測量精度。

3、頂尖座及導軌面采用球墨鑄鐵，耐磨，不易變形。

4、滑座采用快速鎖緊（已申請專利），雙方向位置鎖緊重復定位精度≤0.002。

5、可選配表座滑臺帶導軌螺桿移動型，適合多截面快速測量。

Characteristic:

1. Precision steel apex is adopted. Tungsten steel apex can be selected for wear resistance.

2. Equipped with a high-precision table, it can be fine-tuned precisely to ensure the measurement accuracy.

3. Nodular cast iron is used for the top seat and guide rail surface, which is wear-resistant and not easy to deform.

4. The slider adopts fast locking (patented), and the repetitive positioning accuracy of two-way position locking is less than 0.002.

5. Optional sliding table with guide rail screw movable type, suitable for multi-section rapid measurement.

迷你偏擺測量儀

偏擺測量儀主要用于檢測軸類、盤類零件的徑向、圓跳動和端面跳動。同時對具有中心孔的帶軸內(nèi)外嚙合圓柱齒輪、圓錐齒輪、蝸輪和蝸桿的齒圈徑向跳動和端面跳動進行測定（如果被測齒不帶軸，可訂制具有中心孔的芯軸），也可對其有中心孔的圓柱和圓錐的徑向跳動和端面跳動進行測定。

Mini-pendulum measuring instrument

The pendulum measuring instrument is mainly used to detect radial, circular and end run-out of shaft and disk parts. At the same time, the radial run-out and end run-out of ring teeth of cylindrical gears, bevel gears, worm gears and worm with inner and outer engagement with central hole are measured (if the measured teeth do not have a shaft, the core shaft with central hole can be customized), and the radial run-out and end run-out of cylinder and cone with central hole can also be measured.