型號 Type | 測量范圍mm Measuring Range mm | |||
適用外徑 Applicable diameter | 適用內徑 Applicabl Inside | 適用長度 Applicable diameter | ≤精度 ≤Accuracy | |
CON1-SE02 | 0.8-58 | 23-58 | 160 | 0.015 |
CON1-SE03 | 1-81 | 31-70 | 0.002 | |
CON1-SE04 | 1.5-116 | 43-106 | 0.003 | |
CON1-SE05 | 1.5-160 | 52-148 | 0.003 | |
快速卡盤同心度儀
型號：CON-SE
裝夾方式：快速卡盤，手動轉動卡緊；
旋轉精度：≤ 0.004mm
旋轉精度：≤ 0.005-0.03 mm（如下表）
旋轉方式：手輪帶動旋轉，由同步皮帶帶動主軸旋轉。
測量方式：柔性表架夾持杠桿表探測
測量表選擇：刻度百分表，數字千分表
主要用于檢測短小軸類、盤類零件的徑向、圓跳動和端面跳動。帶螺紋或帶扁位臺階軸為基準軸測量的軸類，可以測量其同心度，（通用雙滾輪式同心度儀不適合夾持帶扁位的工件軸，）可以快速裝夾并測量徑向跳動和端面跳動。
適用于安瓿瓶,,西林液瓶,西林瓶,圓膠蘘,礦泉水瓶,啤酒瓶, 偏差,跳動,
Fast chuck concentricity meter
Model: CON-SE
Clamping method: fast chuck, manual rotation clamping;
Rotation accuracy: ≤0.004mm
Rotation accuracy≤0.005-0.03 mm (table below)
Rotation mode: Hand-wheel drives rotation, and synchronous belt drives spindle rotation.
Measurement method: flexible table holder lever meter detection
Measurement Meter Selection: Scale Percentimeter, Digital Micrometer
It is mainly used to detect the radial, circular and end run-out of short axle and disc parts. The concentricity of the benchmark axis with thread or flat step axis can be measured, and the radial runout and end runout can be quickly clamped and measured.
Applicable to ampoule bottle, cillin liquid bottle, cillin bottle, round rubber jelly, mineral water bottle, beer bottle, deviation, jump.
- 類型 :
